尊龙凯时人生就是搏

׼

֧

Copper SFP

Copper SFP

Copper SFP/SFPòSFPװ100.Ʒ֧1.25Gb/s֧ 100mRJ455˫Ϊʣ ֧¶ȹģ-40~+85棩RJ45ӿѹ3.3 ¼ַ:

  • Copper SFP/SFP
  • 10/100M˳ӦCopper SFP/SFP
  • ǧCopper SFP/SFP
  • 10/100/1000M˳ӦCopper SFP/SFP

Copper SFP

1.25G 1000Base-T SFP, Copper SFP, RJ-45 SFP | GLC-T

1.25G 1000Base-T SFP, Copper SFP, RJ-45 SFP | GLC-T

1.25G 1000Base-T SFP, Copper SFP, RJ-45 SFP | GLC-T

1000Base-T
Data Rate: 1.25G
Interface: RJ-45
Ratch: 100-meter @CAT.5e Cable
Cable: CAT.5e Cable
F-tone Networks offer Compatible Service

1.25G SFP 1000Base-T, Copper SFP-T, RJ-45

1.25G SFP 1000Base-T, Copper SFP-T, RJ-45

1.25G SFP 1000Base-T, Copper SFP-T, RJ-45

F-tone Networks's FT-77-ASF-GE-T is a 1000Base-T Copper RJ45 SFP Transceiver, designed in with Marvell 88E1111 PHY chip following IEEE 802.3ab and SFP MSA, supporting up to 100-meter transmission over CAT.5e

10/100/1000BASE Copper SFP

10/100/1000BASE Copper SFP

  1. Hot-pluggable SFP footprint
  2. Extended case temperature range: 0C to 70C(Standard), -40C to 85C (Industrial)
  3. Fully metallic enclosure for low EMI
  4. Compact RJ-45 connector assembly
  5. It supports RX_LOS(Loss of Signal) function
  6. Compatible with IEEE802.3u
  7. Access to physical layer IC via 2-wire serial bus
  8. A 10/100BASE-TX/ 100BASE-FX converter

10/100BASE Copper SFP

10/100BASE Copper SFP

  1. Hot-pluggable SFP footprint
  2. Extended case temperature range: 0C to 70C(Standard), -40C to 85C (Industrial)
  3. Fully metallic enclosure for low EMI
  4. Compact RJ-45 connector assembly
  5. It supports RX_LOS(Loss of Signal) function
  6. Compatible with IEEE802.3u
  7. Access to physical layer IC via 2-wire serial bus
  8. A 10/100BASE-TX/ 100BASE-FX converter

100/1000Base-T, Copper RJ-45 SFP, SFP-GE-T

100/1000Base-T, Copper RJ-45 SFP, SFP-GE-T

100/1000Base-T, Copper RJ-45 SFP, SFP-GE-T

100/1000Base-T
Data Rate: 100~1000Mb/s multi-rate
Interface: RJ-45
Ratch: 100 meters transmission over CAT.5e
Cable: CAT.5e Cable
F-tone Networks offer Compatible Service

1000Base-T CAT5e Copper SFP RJ45, 100 M | GLC-T

1000Base-T CAT5e Copper SFP RJ45, 100 M | GLC-T

1000Base-T CAT5e Copper SFP RJ45, 100 M | GLC-T

1000Base-T SFP
CAT. 5e
100-Meter
F-tone Networks offer Compatible Service

1000BASE-T Copper SFP Transceiver

1000BASE-T Copper SFP Transceiver

1000BASE-T Copper SFP Transceiver

F-tone Networks 1000BASE-T copper SFP transceiver is based on the SFP Multi-Source Agreement (MSA). They are compatible with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE Std 802.3, which support 1000Mbps data-rate up to 100 meter reach over unshielded twisted-pair category-5 cable.

10G Copper SFP+

10G Copper SFP+

10G Copper SFP+

FT-AM-T-C96-02 10G BASE-T Copper Small Form Pluggable (SFP) modules are based on the SFP Multi Source Agreement (MSA). It is compliant with the 10G BASE-T,5G Base-T, 2.5G Base-T, 1000BASE-T, 100BASE-TX standards as specified in IEEE STD 802.3an, 802.3ab and 802.3au.

10G SFP+ Active Copper Cable Assembly

10G SFP+ Active Copper Cable Assembly

10G SFP+ Active Copper Cable Assembly

Product Description
F-tone Networks’s Active SFP+ Copper Cables are full-active 11.1Gbps cable assemblies.The cablesare compliant with the current SFF-8431, SFF-8432 and SFP+ MSA specifications. They fill the expanding need for cost effective data center interconnects that cannot be served with passive copper or expensive fiber optic solutions.

10G SFP+ Passive Copper Cable Assembly

10G SFP+ Passive Copper Cable Assembly

10G SFP+ Passive Copper Cable Assembly

Product Description
The passive SFP+ Direct attach copper cable assembly is a low cost alternative for short reach applications. The design allows for a serial data transmission up to 12Gbps in each direction. The passive design has no signal amplification in the cable assembly. 

10G-BASE-T Copper SFP+ Transceiver

10G-BASE-T Copper SFP+ Transceiver

10G-BASE-T Copper SFP+ Transceiver

Description
F-tone Networks’s FTCS-10G-Txx-M Copper Small Form Pluggable Plus (SFP+) transceivers is high performance, cost effective module compliant with the 10 Gigabit Ethernet and 10G BASE-T standards as specified in IEEE 802. 3-2015 and IEEE 802.3an, which supporting 10Gbps data-rate up to 30 meters reach over shielded twisted-pair category 6A cable. 

10Gb/s Copper SFP Transceiver

10Gb/s Copper SFP Transceiver

10Gb/s Copper SFP Transceiver

Description
FTCS-10G-Txx Copper Small Form Pluggable (SFP) transceivers are based on the SFP Multi Source Agreement (MSA). They are compatible with the Gigabit Ethernet standards as specified in IEEE STD 802.3an. The 10GBASE-T physical layer IC (PHY) can be accessed via I2C, allowing access to all PHY settings and features.

10GBASE-T Copper SFP+ Transceiver

10GBASE-T Copper SFP+ Transceiver

10GBASE-T Copper SFP+ Transceiver

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

Lead Time: 2~6 days
Customized for 1-4Gb/s
F-tone Networks Made in China.

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

1~4Gb/s SFP Copper Direct-attached Twinax Cable, 0.5-Meter

1-4Gb SFP Interconnect Cable provide interconnection among switches, servers and routers with 1.25GbE SFP connectors to the Fibre Channel PCI Cards. They can also be used to connect the RAIDs with SFP connectors to most 2Gb and 4Gb Fibre Channel Switches.

[12  >>  

Search

sitemapվͼ